Sonya Awning April 25th, 2018 - 08:35:06
Retractable awnings were quick to catch on in Europe, from open air markets to apartments and homes. In fact, the classic lateral arm awning is called a California Style Awning in Europe - and a European Style Awning in the US. Now, the retractable awning market is decidedly driven by Europe. Millions of retractable awnings are sold there annually and are found on the majority of homes and businesses, even being considered in the architectural design process. The highest quality manufacturers, most innovative new designs, and emerging trends are coming from European companies. By comparison, the awning market in America has been limited to mainly commercial buildings. Substantially fewer awnings are sold in the United States yearly - less than 50,000 - so the market, according to the Industrial Fabric Association International, is only about 2% saturated. Theres room for a change.
Installation in a Few Easy Steps The general installation process for both traditional retractable awnings and drop screens is pretty simple: attach the correct number of mounting brackets using the appropriate fixing and insert the torsion (square) bar. The simplicity of installing awnings is what makes them ideal for do-it-yourself weekend projects. The exact installation steps, naturally, vary depending on the awning being installed (so always read the manufacturers specific instructions!), but these are the general processes. For a drop screen:1. Assemble the screen itself, putting together the roller (called the headerbox), similar to an old-fashioned shade.2. Install the mounting brackets at the top and around the door frame or the beam of the gazebo or porch.3. Snap in the headerbox, making sure that the bottom rail of the screen is toward the inside of the room.4. If there are vertical side guides, measure and cut them according to the height of the opening, and then screw them in place and snap them in position with the headerbox. If there are guide wires, screw the bottom brackets into place, and attach the wires to the cassette. Be sure everything is level and plumb.
Why is the awning being used? Figure out clearly why that area needs protection and what element you want to control. The requirements for the awning are different for rain protection and sun protection. For example, to use the awning in wet areas, have at least a 3 inch slope, or pitch, to the awning per foot of extension. If an awning extends 12 feet, the pitch should be 36 inches, meaning that the awning must be mounted 3 feet higher than the height at the end of the awning fully extended. Awnings in sunny locations with little can be nearly flat. For other situations, awnings may not be ideal; high, sustained winds can seriously damage awnings, as can the weight from snow, ice, and hail. Accessories like wind or motion sensors can also be used to protect the retractable awning in less than ideal conditions.
Retractable awnings offer a slew of advantages over fixed awnings, from easy installation to longer lifetimes. As the name indicates, retractable awnings retract, folding to help control the placement of the shade or to protect the awning. Because of their durability, retractable awnings can be long-term fixtures on the exterior of a home or commercial building, providing better outdoor living and working spaces; offering, sun, heat, glare and ultraviolet ray (UV) protection; and enhancing exterior appeal. Finding Purpose: Uses for Retractable Awnings Retractable awnings are most commonly used for element protection. Over 70% of awnings are purchased specifically to provide shade. This shade is primarily for comfort, to cut down on the brightness of the sun, cool off outdoor ambient temperatures, and make entrances more welcoming, but there are other benefits as well: