Sonya Awning January 24th, 2018 - 23:59:31
How much shade coverage is required. What the width of the awning should be, based on the shade area. Add at least 12 inches to maximize coverage for sun and rain protection. How far out the awning extends (the projection), based on the shade area. There is a natural slope to an awning, so the actual shade is several inches shorter than the full projection. How high to mount the awning. Because of the awnings slope, the front of the awning is lower than the mounting position; this difference is the drop. The recommended drop is 3 inches per foot of projection. So, if the awning has a 12-foot projection, the drop is about 36 inches. To get a 7-foot clearance under the front bar, the awning has to be mounted at least 10 feet high. Scout out a mounting place that is free of obstructions (no lights, gutters, wiring, or ornamentation) and has adequate clearance around any doors or windows. For screens, make sure that any doors swing away from the screen. For retractable awnings, make sure the awning can extend its full projection without running into a tree, patio, roofline, or fence.
The Different Levels of Retractable Awnings etractable awning companies usually draw distinctions between the different levels of quality which they sell. The highest quality level is for commercial grade retractable awnings. Commercial lines have high-grade manufacturing and use extremely durable, heavy duty materials to increase their lifetimes. The other common designation is residential awning, which are usually less expensive to produce. The less expensive, lower grade materials mean many residential awnings have shorter life spans. One important thing to recognize: The difference between commercial and residential awnings is not because of different styles, sizes, or options. Theres nothing special about a commercial awning that makes it too grand for homes. The difference that sets apart commercial awnings is their superior quality of workmanship and materials.
Awnings have been common for more than 2000 years; retractable awnings have been around for almost 150 years. While the history of using awnings stretches far back in Europe and retractable awnings are commonly used there today, theyre rare in the United States - despite the fact that retractable awnings were invented in the US. This uneven adoption has led to an exposure of design options in Europe - intricate frames, new types of retractable frames, bold colors, and luscious patterns - while America, treating awnings as a practical afterthought, has stayed more conservative. A Quick History Some form of awnings has been around for millennia, starting in Egypt and the Middle East and spreading across the Roman Empire. Most of those were fixed canopies of mats, skins, or fabric bolts hung over poles. In the mid-1800s, shop owners began using movable awnings, which simply bunched up the fabric when it was taken down. In the latter part of the century, they began rolling awnings on a tube, cleanly retracting them and keeping the fabric safe. With minor variation, this is the same basic design used today on lateral arm retractable awnings.
PVC - a hard polymer also used to make plumbing pipes; this tends to be brittle. Kevlar® - the polymer used to make bulletproof vests; Kevlar® straps in the arms instead of cables are extremely strong and durable and cant rust. Cables - braided metal strands which are used in the arms; these are usually steel, which rusts, leading the cables to discolor the fabric and eventually break. Cables cannot be replaced because they are internal to the arm and inaccessible. Terms: Installation Understanding a few terms about the positioning and installation of the awning can help determine the appropriate size and installation location for your awning: o Mount - what way or location the awning is affixed to the home or building, such as a wall mount, eave mount, soffit, or roof mount. Pitch - the angle that the awning comes down from the mount point to the front bar. Some lateral arm retractable awnings have an adjustable pitch. Projection - how far out from the wall the awning can extend. Load - the stress put on the awning, from wind, snow, even the weight of the awning itself (dead load). Good quality retractable awnings can sustain wind speeds up to approximately 35mph Pooling - water buildup on the canopy which can cause the fabric to sag and stretch.