Sonya Awning April 29th, 2018 - 11:26:23
Window Awnings are available in traditional and contemporary styles. Traditional style window awnings have sides that will give you more sun protections than awnings without sides. Awnings with sides are especially needed for East and West facing windows. Spear Window Awnings are made with wrought iron frames with spear finials. Spear Awnings look great on adobe and more modern homes. Drop arm Awnings for windows roll up on a roller tube and can be motorized. Drop Arm Awnings with motors are convenient for second story windows so they can be retracted easily from indoors. Porch Awnings around the perimeter of your porch adds privacy and protection. Porch Awnings can keep your porch cool will protecting it from rain and the sun. You can use Window Awnings around a porch or Canvas Porch Roller Curtains which will can roll up and down with a simple rope and pulley system. Porch Valances are also a popular decorative addition to porches. These Canvas Valances are for decorative purposes but do not have much sun protection because they are a small accent to a porch. They are 12" - 14" tall and wrap around a porch to add color and will soften the hard lines of a porch. They are especially popular on coastal homes on the East coast.
Installation in a Few Easy Steps The general installation process for both traditional retractable awnings and drop screens is pretty simple: attach the correct number of mounting brackets using the appropriate fixing and insert the torsion (square) bar. The simplicity of installing awnings is what makes them ideal for do-it-yourself weekend projects. The exact installation steps, naturally, vary depending on the awning being installed (so always read the manufacturers specific instructions!), but these are the general processes. For a drop screen:1. Assemble the screen itself, putting together the roller (called the headerbox), similar to an old-fashioned shade.2. Install the mounting brackets at the top and around the door frame or the beam of the gazebo or porch.3. Snap in the headerbox, making sure that the bottom rail of the screen is toward the inside of the room.4. If there are vertical side guides, measure and cut them according to the height of the opening, and then screw them in place and snap them in position with the headerbox. If there are guide wires, screw the bottom brackets into place, and attach the wires to the cassette. Be sure everything is level and plumb.
Although any retractable awning style is used on homes, most budget lines are limited to a single design. High quality awning lines can offer a half dozen styles or more.- High quality lines offer support for years for parts, even for additional options. Budget lines, particularly at big-box chains, only offer add-ons for a single season and service can lapse within a year, if its even available. When buying budget, the quality of the company becomes much more important. There are some dependable budget retractable awning manufacturers and retailers out there, with solid support, good products, and attractive awning styles. You just have to look.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.