Sonya Awning April 29th, 2018 - 10:44:58
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
There are dozens of styles of retractable awnings, determined mainly by the frame shape: Lateral arm awning - the most common, and oldest, retractable awning style, consisting simply of two or more arms, the front bar, mounting bar and the fabric. This is the most popular style for homes and commercial buildings; this is also the most scalable style, extending (projecting) as far as 17 feet without external supports. Dome - an awning with curved ribs, which forms a rounded shape when fully extended; these tend to have a significantly shorter extension (projection) than lateral arm awnings, extending only about five feet out maximum from the mount point. An elongated dome can have a longer projection than a standard dome style, almost double. Dome awnings are common for commercial properties and for window and door awnings. Drop screen - a kind of retractable awning which is mounted vertically so it extends downward. This style of awning has the mounting bar and fabric, but no arms since it simply "drops" down. This is mainly used to screen patios, gazebos, and other outdoor areas from glare, heat, rain, UV rays, direct sun, mosquitoes, and pollen.
There are also dozens of different accessories for retractable awnings which make them easier to operate. A couple of common ones: Anemometer - a device which monitors wind speed; this is used with wind sensors. Sensors - devices which monitor different atmospheric conditions and trigger the motor to retract or extend the awning accordingly; there are four major kinds of sensors, including sun (light) sensors, wind sensors, rain sensors, and motion sensors (which monitor movements, such as wind gusts) Motor - a device which automatically moves the awning; motors are enclosed in the roller tube.Terms: Materials The retractable awning materials are the true indicator of quality - because the kind of materials used translates into quality, not the expense of the materials. For the fabric, there are two major categories of fabrics:
Other retractable awning features impact how well the awning wears, and, therefore, how easy it is to maintain: Electro-statically powder-coated aluminum frames to resist corrosion and chipping Sealed and self-lubricating retractable awning motors Weather-sealed wind, motion, rain, and sun sensors and other accessories Stainless-steel mounting hardware to prevent staining or bleeding from rust Kevlar® brand straps in the arms, not steel cables which will rust TÜV product approved and Eurolab certified frames These components make the average lifetime of a retractable awning 12-15 years for fabric and 25 years for the frame - almost five times longer than most fixed awnings or canopies, and without the need to professional cleaning or seasonal storage problems. With retractable awnings, the keyword for maintenance is effortless.