Home / Awning / unique aluminum awnings for mobile homes with awesome design / Mobile Home Awning Installation Aluminum Awnings For Mobile Homes Mobile Home Awning Extenders Mobile Home Carports Diy Mobile Home Awning
Sonya Awning April 06th, 2018 - 13:22:55
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Saving Your Environment - Where Awnings Can Go The protection from retractable awnings can apply in unexpected places. The most obvious places where shade would be appealing are in Sun Belt states with sunny and dry climates. Interestingly, retractable deck and patio awnings for sun protection are extremely popular in Pennsylvania, New York, and New Jersey, despite long winters and heavy precipitation, because the high cost of electricity makes energy savings important. Whether a retractable awning is useful depends on how that area will be used and if it is possible to find a design suited to that specific need. Ask yourself a few questions to help identify if a retractable awning can meet your needs.
Different Reasons for Using Awnings Various factors have come into play for why Europe has, for nearly a century, been consistently integrating retractable awnings into architectural plans. Many of the initial reasons were cultural; prevalent open air markets had contributed to a long history of fixed awning use, so it was a natural transition to easier to use and longer-lasting retractable awnings. More practically, though, the widespread use of retractable awnings comes down to cooling and energy efficiency. Europe has very high energy costs and, because of many old homes and flats, most residences do not have air-conditioning systems installed. Therefore, European homeowners have had an imperative to find inexpensive, effective cooling and efficiency products - and one of the most effective methods for controlling interior heat is retractable awnings.
How much shade coverage is required. What the width of the awning should be, based on the shade area. Add at least 12 inches to maximize coverage for sun and rain protection. How far out the awning extends (the projection), based on the shade area. There is a natural slope to an awning, so the actual shade is several inches shorter than the full projection. How high to mount the awning. Because of the awnings slope, the front of the awning is lower than the mounting position; this difference is the drop. The recommended drop is 3 inches per foot of projection. So, if the awning has a 12-foot projection, the drop is about 36 inches. To get a 7-foot clearance under the front bar, the awning has to be mounted at least 10 feet high. Scout out a mounting place that is free of obstructions (no lights, gutters, wiring, or ornamentation) and has adequate clearance around any doors or windows. For screens, make sure that any doors swing away from the screen. For retractable awnings, make sure the awning can extend its full projection without running into a tree, patio, roofline, or fence.