Home / Awning / surprising do it yourself aluminum awnings inventiveness / Do Yourself Patio Cover Kits Lowes Patio Covers Metal Awnings For Front Doors Free Standing Patio Cover Kits How To Build An Awning Over A Door
Sonya Awning April 06th, 2018 - 13:38:51
Awning manufacturers have a shorthand jargon that succinctly describes their awnings characteristics, quality, function, even style. Knowledge is the key to having an efficient (and enjoyable) online shopping experience for retractable awnings. These simplified common terms can help you know in advance what youre looking at, so you know how to find what you want. Terms: Parts A lateral arm retractable awning is an awning which can be rolled up and closed; unlike fixed awnings and canopies, a retractable awning has no support posts. A retractable awning has an intrinsically simple design: o Frame - the skeleton of the awning; the frame is comprised of the mounting bar, arms, and roller tube. Mounting bar - the base of the retractable awning which is mounted in place; when the awning is retracted, the awning fabric rolls around the roller tube attached to the mounting bar.
Usually, then, when a company advertises a "residential awning," theyre signaling that this is a budget line, while "commercial grade awnings" represent high-end lines. Manufacturing Regions and Differences in Quality here are three important manufacturing regions for retractable awnings: Europe, North America, and Asia (mainly China). Each of these manufacturing regions corresponds almost directly to the awning quality: The highest quality retractable awnings are manufactured in Europe, midrange awnings in America, and budget lower quality awnings in China. Most awning companies in the USA sell either commercial awnings from Europe or budget lines from China.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Why is the awning being used? Figure out clearly why that area needs protection and what element you want to control. The requirements for the awning are different for rain protection and sun protection. For example, to use the awning in wet areas, have at least a 3 inch slope, or pitch, to the awning per foot of extension. If an awning extends 12 feet, the pitch should be 36 inches, meaning that the awning must be mounted 3 feet higher than the height at the end of the awning fully extended. Awnings in sunny locations with little can be nearly flat. For other situations, awnings may not be ideal; high, sustained winds can seriously damage awnings, as can the weight from snow, ice, and hail. Accessories like wind or motion sensors can also be used to protect the retractable awning in less than ideal conditions.