Sonya Awning April 05th, 2018 - 08:40:02
Arms - the part of the frame which folds closed at the elbow when the awning is retracted (rolls in) and opens when the awning is extended (rolls out). Shoulder - the joints on the retractable awning arms where arms attach to the mounting bar. Front bar - the extrusion at the very front of the awning frame. Hood - a cover which fits over the retractable awning frame and fabric; when the awning is fully retracted, the hood protects the exposed fabric, frame, and motor from the elements. Valance - a strip of fabric, usually a few inches high, which hangs from the front bar of the retractable awning. Rib - the cross bars of the frame which support the awning fabric. Not every awning style has ribs, since ribs are often used to create a shape to the awning frame; for example, lateral arm retractable awnings dont have any ribs. Canopy - an elongated, dome, or waterfall style retractable awning.
The Different Levels of Retractable Awnings etractable awning companies usually draw distinctions between the different levels of quality which they sell. The highest quality level is for commercial grade retractable awnings. Commercial lines have high-grade manufacturing and use extremely durable, heavy duty materials to increase their lifetimes. The other common designation is residential awning, which are usually less expensive to produce. The less expensive, lower grade materials mean many residential awnings have shorter life spans. One important thing to recognize: The difference between commercial and residential awnings is not because of different styles, sizes, or options. Theres nothing special about a commercial awning that makes it too grand for homes. The difference that sets apart commercial awnings is their superior quality of workmanship and materials.
European lines have the highest quality, partly because awnings have been used in Europe for thousands of years and are tightly integrated with building design concepts. This long history has led to the best designed and manufactured awnings available: Tight manufacturing standards- Internationalized, rigorous QA testing standards- Certification processes for materials- Durable material quality for frames, fabrics, and threads- Continuously evolving styles, features, and development On the other hand, most budget (residential) retractable awnings tend to be made in China, an area plagued by consistent complaints about poor quality control, poor materials, and poor labor. With budget lines, product quality, sometimes even product materials, varies significantly between lots. - Lower quality materials- Lack of testing or certifications- Limited styles- Inconsistent manufacturing quality.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.