Home / Awning / supreme patio awnings home depot photos / Retractable Awning Prices Manual Retractable Awnings Home Depot Retractable Patio Awnings Motorized Retractable Awnings Prices Retractable Awning Costco
Sonya Awning April 29th, 2018 - 12:10:07
Arms - the part of the frame which folds closed at the elbow when the awning is retracted (rolls in) and opens when the awning is extended (rolls out). Shoulder - the joints on the retractable awning arms where arms attach to the mounting bar. Front bar - the extrusion at the very front of the awning frame. Hood - a cover which fits over the retractable awning frame and fabric; when the awning is fully retracted, the hood protects the exposed fabric, frame, and motor from the elements. Valance - a strip of fabric, usually a few inches high, which hangs from the front bar of the retractable awning. Rib - the cross bars of the frame which support the awning fabric. Not every awning style has ribs, since ribs are often used to create a shape to the awning frame; for example, lateral arm retractable awnings dont have any ribs. Canopy - an elongated, dome, or waterfall style retractable awning.
Saving Your Environment - Where Awnings Can Go The protection from retractable awnings can apply in unexpected places. The most obvious places where shade would be appealing are in Sun Belt states with sunny and dry climates. Interestingly, retractable deck and patio awnings for sun protection are extremely popular in Pennsylvania, New York, and New Jersey, despite long winters and heavy precipitation, because the high cost of electricity makes energy savings important. Whether a retractable awning is useful depends on how that area will be used and if it is possible to find a design suited to that specific need. Ask yourself a few questions to help identify if a retractable awning can meet your needs.
Although any retractable awning style is used on homes, most budget lines are limited to a single design. High quality awning lines can offer a half dozen styles or more.- High quality lines offer support for years for parts, even for additional options. Budget lines, particularly at big-box chains, only offer add-ons for a single season and service can lapse within a year, if its even available. When buying budget, the quality of the company becomes much more important. There are some dependable budget retractable awning manufacturers and retailers out there, with solid support, good products, and attractive awning styles. You just have to look.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.