Home / Awning / supreme patio awnings home depot photos / Motorized Retractable Awnings Sunsetter Motorized Retractable Awnings Motorized Awnings For Decks Metal Awnings For Homes Aluminum Awning Prices
Sonya Awning April 29th, 2018 - 12:09:25
There are also dozens of different accessories for retractable awnings which make them easier to operate. A couple of common ones: Anemometer - a device which monitors wind speed; this is used with wind sensors. Sensors - devices which monitor different atmospheric conditions and trigger the motor to retract or extend the awning accordingly; there are four major kinds of sensors, including sun (light) sensors, wind sensors, rain sensors, and motion sensors (which monitor movements, such as wind gusts) Motor - a device which automatically moves the awning; motors are enclosed in the roller tube.Terms: Materials The retractable awning materials are the true indicator of quality - because the kind of materials used translates into quality, not the expense of the materials. For the fabric, there are two major categories of fabrics:
Different Reasons for Using Awnings Various factors have come into play for why Europe has, for nearly a century, been consistently integrating retractable awnings into architectural plans. Many of the initial reasons were cultural; prevalent open air markets had contributed to a long history of fixed awning use, so it was a natural transition to easier to use and longer-lasting retractable awnings. More practically, though, the widespread use of retractable awnings comes down to cooling and energy efficiency. Europe has very high energy costs and, because of many old homes and flats, most residences do not have air-conditioning systems installed. Therefore, European homeowners have had an imperative to find inexpensive, effective cooling and efficiency products - and one of the most effective methods for controlling interior heat is retractable awnings.
o Canvas - a natural fiber (cotton) woven fabric; canvas awnings are prone to fade, mildew, and rot.o Solution-dyed acrylic - a man-made fiber which is woven into a lightweight, breathable fabric; because it is a chemical polymer, the fabric cannot rot. Solution-dyed means that the pigments are included in the fiber solution, which makes the fabric highly fade resistant. For the frame, the important materials are the body and joints: o Electrostatically powder-coated aluminum - a metal frame which is lightweight, durable, and rust-resistant; powder-coating is a method of applying pigment to aluminum frames which is extremely difficult to flake off or damage, unlike enamel or paint.
How much shade coverage is required. What the width of the awning should be, based on the shade area. Add at least 12 inches to maximize coverage for sun and rain protection. How far out the awning extends (the projection), based on the shade area. There is a natural slope to an awning, so the actual shade is several inches shorter than the full projection. How high to mount the awning. Because of the awnings slope, the front of the awning is lower than the mounting position; this difference is the drop. The recommended drop is 3 inches per foot of projection. So, if the awning has a 12-foot projection, the drop is about 36 inches. To get a 7-foot clearance under the front bar, the awning has to be mounted at least 10 feet high. Scout out a mounting place that is free of obstructions (no lights, gutters, wiring, or ornamentation) and has adequate clearance around any doors or windows. For screens, make sure that any doors swing away from the screen. For retractable awnings, make sure the awning can extend its full projection without running into a tree, patio, roofline, or fence.