Sonya Awning April 29th, 2018 - 12:09:19
Longevity. Fixed awnings have a fabric lifetime of five years or less because of constant exposure to the sun, snow, rain, and wind, all of which can fade or tear the fabric. Retractable awnings have a huge advantage in being able to retract - the fabric can be protected in adverse weather conditions. Combined with options like a motor and sensors (for light, wind, rain, and motion), the awning can be closed automatically in conditions which would normally damage the fabric or frame. Retracting the awning when its not in use, like on shady or cold days, cuts down on sun damage to the fabric from UV exposure. With a retractable awning, the average lifetime for the fabric is 15 years - three times better than a fixed awning. Since retractable awning frames have warranties of up to 25 years and motors have warranties up to 5 years, motorized retractable awnings offer a really excellent cost investment.
How much shade coverage is required. What the width of the awning should be, based on the shade area. Add at least 12 inches to maximize coverage for sun and rain protection. How far out the awning extends (the projection), based on the shade area. There is a natural slope to an awning, so the actual shade is several inches shorter than the full projection. How high to mount the awning. Because of the awnings slope, the front of the awning is lower than the mounting position; this difference is the drop. The recommended drop is 3 inches per foot of projection. So, if the awning has a 12-foot projection, the drop is about 36 inches. To get a 7-foot clearance under the front bar, the awning has to be mounted at least 10 feet high. Scout out a mounting place that is free of obstructions (no lights, gutters, wiring, or ornamentation) and has adequate clearance around any doors or windows. For screens, make sure that any doors swing away from the screen. For retractable awnings, make sure the awning can extend its full projection without running into a tree, patio, roofline, or fence.
Usually, then, when a company advertises a "residential awning," theyre signaling that this is a budget line, while "commercial grade awnings" represent high-end lines. Manufacturing Regions and Differences in Quality here are three important manufacturing regions for retractable awnings: Europe, North America, and Asia (mainly China). Each of these manufacturing regions corresponds almost directly to the awning quality: The highest quality retractable awnings are manufactured in Europe, midrange awnings in America, and budget lower quality awnings in China. Most awning companies in the USA sell either commercial awnings from Europe or budget lines from China.
There are dozens of styles of retractable awnings, determined mainly by the frame shape: Lateral arm awning - the most common, and oldest, retractable awning style, consisting simply of two or more arms, the front bar, mounting bar and the fabric. This is the most popular style for homes and commercial buildings; this is also the most scalable style, extending (projecting) as far as 17 feet without external supports. Dome - an awning with curved ribs, which forms a rounded shape when fully extended; these tend to have a significantly shorter extension (projection) than lateral arm awnings, extending only about five feet out maximum from the mount point. An elongated dome can have a longer projection than a standard dome style, almost double. Dome awnings are common for commercial properties and for window and door awnings. Drop screen - a kind of retractable awning which is mounted vertically so it extends downward. This style of awning has the mounting bar and fabric, but no arms since it simply "drops" down. This is mainly used to screen patios, gazebos, and other outdoor areas from glare, heat, rain, UV rays, direct sun, mosquitoes, and pollen.