Sonya Awning April 29th, 2018 - 12:08:20
How much shade coverage is required. What the width of the awning should be, based on the shade area. Add at least 12 inches to maximize coverage for sun and rain protection. How far out the awning extends (the projection), based on the shade area. There is a natural slope to an awning, so the actual shade is several inches shorter than the full projection. How high to mount the awning. Because of the awnings slope, the front of the awning is lower than the mounting position; this difference is the drop. The recommended drop is 3 inches per foot of projection. So, if the awning has a 12-foot projection, the drop is about 36 inches. To get a 7-foot clearance under the front bar, the awning has to be mounted at least 10 feet high. Scout out a mounting place that is free of obstructions (no lights, gutters, wiring, or ornamentation) and has adequate clearance around any doors or windows. For screens, make sure that any doors swing away from the screen. For retractable awnings, make sure the awning can extend its full projection without running into a tree, patio, roofline, or fence.
European lines have the highest quality, partly because awnings have been used in Europe for thousands of years and are tightly integrated with building design concepts. This long history has led to the best designed and manufactured awnings available: Tight manufacturing standards- Internationalized, rigorous QA testing standards- Certification processes for materials- Durable material quality for frames, fabrics, and threads- Continuously evolving styles, features, and development On the other hand, most budget (residential) retractable awnings tend to be made in China, an area plagued by consistent complaints about poor quality control, poor materials, and poor labor. With budget lines, product quality, sometimes even product materials, varies significantly between lots. - Lower quality materials- Lack of testing or certifications- Limited styles- Inconsistent manufacturing quality.
Usually, then, when a company advertises a "residential awning," theyre signaling that this is a budget line, while "commercial grade awnings" represent high-end lines. Manufacturing Regions and Differences in Quality here are three important manufacturing regions for retractable awnings: Europe, North America, and Asia (mainly China). Each of these manufacturing regions corresponds almost directly to the awning quality: The highest quality retractable awnings are manufactured in Europe, midrange awnings in America, and budget lower quality awnings in China. Most awning companies in the USA sell either commercial awnings from Europe or budget lines from China.
Window Awnings are available in traditional and contemporary styles. Traditional style window awnings have sides that will give you more sun protections than awnings without sides. Awnings with sides are especially needed for East and West facing windows. Spear Window Awnings are made with wrought iron frames with spear finials. Spear Awnings look great on adobe and more modern homes. Drop arm Awnings for windows roll up on a roller tube and can be motorized. Drop Arm Awnings with motors are convenient for second story windows so they can be retracted easily from indoors. Porch Awnings around the perimeter of your porch adds privacy and protection. Porch Awnings can keep your porch cool will protecting it from rain and the sun. You can use Window Awnings around a porch or Canvas Porch Roller Curtains which will can roll up and down with a simple rope and pulley system. Porch Valances are also a popular decorative addition to porches. These Canvas Valances are for decorative purposes but do not have much sun protection because they are a small accent to a porch. They are 12" - 14" tall and wrap around a porch to add color and will soften the hard lines of a porch. They are especially popular on coastal homes on the East coast.