Sonya Awning April 29th, 2018 - 10:09:33
Arms - the part of the frame which folds closed at the elbow when the awning is retracted (rolls in) and opens when the awning is extended (rolls out). Shoulder - the joints on the retractable awning arms where arms attach to the mounting bar. Front bar - the extrusion at the very front of the awning frame. Hood - a cover which fits over the retractable awning frame and fabric; when the awning is fully retracted, the hood protects the exposed fabric, frame, and motor from the elements. Valance - a strip of fabric, usually a few inches high, which hangs from the front bar of the retractable awning. Rib - the cross bars of the frame which support the awning fabric. Not every awning style has ribs, since ribs are often used to create a shape to the awning frame; for example, lateral arm retractable awnings dont have any ribs. Canopy - an elongated, dome, or waterfall style retractable awning.
Usually, then, when a company advertises a "residential awning," theyre signaling that this is a budget line, while "commercial grade awnings" represent high-end lines. Manufacturing Regions and Differences in Quality here are three important manufacturing regions for retractable awnings: Europe, North America, and Asia (mainly China). Each of these manufacturing regions corresponds almost directly to the awning quality: The highest quality retractable awnings are manufactured in Europe, midrange awnings in America, and budget lower quality awnings in China. Most awning companies in the USA sell either commercial awnings from Europe or budget lines from China.
Why is the awning being used? Figure out clearly why that area needs protection and what element you want to control. The requirements for the awning are different for rain protection and sun protection. For example, to use the awning in wet areas, have at least a 3 inch slope, or pitch, to the awning per foot of extension. If an awning extends 12 feet, the pitch should be 36 inches, meaning that the awning must be mounted 3 feet higher than the height at the end of the awning fully extended. Awnings in sunny locations with little can be nearly flat. For other situations, awnings may not be ideal; high, sustained winds can seriously damage awnings, as can the weight from snow, ice, and hail. Accessories like wind or motion sensors can also be used to protect the retractable awning in less than ideal conditions.
UV rays, high wind, gusts, and rain - basically, normal weather - cause the most damage to awnings. Fading, molding, and tearing fabric. Twisting fixed frames from high wind damage or the weight of snow or pooling rain. In only two or three years, fixed awnings and canopies already show substantial wear, which is why the lifetime of most fixed awnings and canopies is only five or six years before the awning need to be replaced. Retractable awnings are closed when not in use, which cuts weather damage. That makes the maintenance much easier on retractable awnings compared to permanent awnings and canopies - there is no need to hunt down replacement parts, replace fabric every couple of years, or attempt to wrangle awnings down and into storage for winter.