Sonya Awning April 05th, 2018 - 08:40:41
Here are a few helpful tips for installations: Always attach retractable awning mounting brackets to a load-bearing part of the building, like a stud, joist, rafter, brick, or beam, depending on the mounting option. Use a chalk line and level. Its just easier than trying to eyeball whether the awning or screen is even. Because of the weight of the awning and to keep everything properly positioned, have two people working on the retractable awning installation. Read the instructions in the kit or on the companys website. When in doubt, call the manufacturers customer service line.In a decent afternoon of work, you can have a lovely retractable awning or drop screen installed over a patio, garden, eating area, walkway - wherever you want to make a pleasing, comfortably shaded haven.
There are also dozens of different accessories for retractable awnings which make them easier to operate. A couple of common ones: Anemometer - a device which monitors wind speed; this is used with wind sensors. Sensors - devices which monitor different atmospheric conditions and trigger the motor to retract or extend the awning accordingly; there are four major kinds of sensors, including sun (light) sensors, wind sensors, rain sensors, and motion sensors (which monitor movements, such as wind gusts) Motor - a device which automatically moves the awning; motors are enclosed in the roller tube.Terms: Materials The retractable awning materials are the true indicator of quality - because the kind of materials used translates into quality, not the expense of the materials. For the fabric, there are two major categories of fabrics:
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Bettering the Customer Experience Retractable awnings can create a more pleasant outdoor experience. This has subtle but tangible effects on customers. The area around entrances is cooler and shaded, protected from rain, and generally more pleasant to be in. The primary function of a better customer experience is better foot traffic. The stylishness of the awning makes customers want to browse, and the glare, heat, and rain protection makes it more comfortable for them to do so. The sun protection has a dual utility, though. The UV protection (since suns rays never reach the interior) preserves window displays and interior furnishings and prevents fading. Even the inside of the store is more appealing for customers, and the heavy investment in signs and merchandise is protected from passive sun damage.