Sonya Awning March 31st, 2018 - 12:10:42
There are dozens of styles of retractable awnings, determined mainly by the frame shape: Lateral arm awning - the most common, and oldest, retractable awning style, consisting simply of two or more arms, the front bar, mounting bar and the fabric. This is the most popular style for homes and commercial buildings; this is also the most scalable style, extending (projecting) as far as 17 feet without external supports. Dome - an awning with curved ribs, which forms a rounded shape when fully extended; these tend to have a significantly shorter extension (projection) than lateral arm awnings, extending only about five feet out maximum from the mount point. An elongated dome can have a longer projection than a standard dome style, almost double. Dome awnings are common for commercial properties and for window and door awnings. Drop screen - a kind of retractable awning which is mounted vertically so it extends downward. This style of awning has the mounting bar and fabric, but no arms since it simply "drops" down. This is mainly used to screen patios, gazebos, and other outdoor areas from glare, heat, rain, UV rays, direct sun, mosquitoes, and pollen.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Retractable awnings are getting attention. From green initiatives to historical renovations to downtown retail centers, property owners are hearing that retractable awnings are a terrific, inexpensive method to save money on energy and create a striking exterior feature. The rise in popularity for retractable awnings in the US means that there is a flood of new retractable awning options available, both in new styles and in new companies. Its tempting to look for the best deal alone, but there is such a variance in quality that customers can end up losing much more with short-lived and poor-performing awnings than they save upfront. It is possible to ascertain the quality of a retractable awning in a surprisingly succinct way: find out where it was made.
A drop screen usually enhances an existing structural feature, such as a door or window, or as panels to enclose a porch, lanai, or gazebo. A drop screen requires a sturdy beam to mount to and possibly a door frame or post to fix the side guides to. After finding the location, simply measure the width of the area from side to side on the interior of the frame (for an inside mount) and add for the width of the side guides if mounted outside the window frame. Then measure the height of the screen, going from the inside (or bottom) of the top frame to the bottom of the threshold for the height; for an outside mount, add the size of the headerbox and bottom rail to the height measurement. Finding an ideal retractable awning location has a few other factors to consider.