Sonya Awning March 31st, 2018 - 12:07:58
European lines have the highest quality, partly because awnings have been used in Europe for thousands of years and are tightly integrated with building design concepts. This long history has led to the best designed and manufactured awnings available: Tight manufacturing standards- Internationalized, rigorous QA testing standards- Certification processes for materials- Durable material quality for frames, fabrics, and threads- Continuously evolving styles, features, and development On the other hand, most budget (residential) retractable awnings tend to be made in China, an area plagued by consistent complaints about poor quality control, poor materials, and poor labor. With budget lines, product quality, sometimes even product materials, varies significantly between lots. - Lower quality materials- Lack of testing or certifications- Limited styles- Inconsistent manufacturing quality.
retractable and fixed awnings: Visibility. Many fixed awnings use stanchions or posts which can block the view; retractable awnings are suspended, either by springloaded arms or with guidewires, depending on the syste. Since they dont require external support, they allow uninterrupted views. Easy installation. Retractable awnings are very simply mounted onto the structure at points like a wall or beam without heavy labor or construction. Variety of use. Retractable awnings can go in small or special areas, such as over windows, where fixed canopies would not be appropriate. Changeability. Retractable awnings can move according to different weather conditions, such as changing the slope of the awning during rain, closing during storms, or using a series of awnings across a long outdoor area that follows the sunlight.
UV rays, high wind, gusts, and rain - basically, normal weather - cause the most damage to awnings. Fading, molding, and tearing fabric. Twisting fixed frames from high wind damage or the weight of snow or pooling rain. In only two or three years, fixed awnings and canopies already show substantial wear, which is why the lifetime of most fixed awnings and canopies is only five or six years before the awning need to be replaced. Retractable awnings are closed when not in use, which cuts weather damage. That makes the maintenance much easier on retractable awnings compared to permanent awnings and canopies - there is no need to hunt down replacement parts, replace fabric every couple of years, or attempt to wrangle awnings down and into storage for winter.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.