Sonya Awning March 31st, 2018 - 12:07:56
Here are a few helpful tips for installations: Always attach retractable awning mounting brackets to a load-bearing part of the building, like a stud, joist, rafter, brick, or beam, depending on the mounting option. Use a chalk line and level. Its just easier than trying to eyeball whether the awning or screen is even. Because of the weight of the awning and to keep everything properly positioned, have two people working on the retractable awning installation. Read the instructions in the kit or on the companys website. When in doubt, call the manufacturers customer service line.In a decent afternoon of work, you can have a lovely retractable awning or drop screen installed over a patio, garden, eating area, walkway - wherever you want to make a pleasing, comfortably shaded haven.
UV rays, high wind, gusts, and rain - basically, normal weather - cause the most damage to awnings. Fading, molding, and tearing fabric. Twisting fixed frames from high wind damage or the weight of snow or pooling rain. In only two or three years, fixed awnings and canopies already show substantial wear, which is why the lifetime of most fixed awnings and canopies is only five or six years before the awning need to be replaced. Retractable awnings are closed when not in use, which cuts weather damage. That makes the maintenance much easier on retractable awnings compared to permanent awnings and canopies - there is no need to hunt down replacement parts, replace fabric every couple of years, or attempt to wrangle awnings down and into storage for winter.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
A drop screen usually enhances an existing structural feature, such as a door or window, or as panels to enclose a porch, lanai, or gazebo. A drop screen requires a sturdy beam to mount to and possibly a door frame or post to fix the side guides to. After finding the location, simply measure the width of the area from side to side on the interior of the frame (for an inside mount) and add for the width of the side guides if mounted outside the window frame. Then measure the height of the screen, going from the inside (or bottom) of the top frame to the bottom of the threshold for the height; for an outside mount, add the size of the headerbox and bottom rail to the height measurement. Finding an ideal retractable awning location has a few other factors to consider.