Sonya Awning April 24th, 2018 - 07:57:59
PVC - a hard polymer also used to make plumbing pipes; this tends to be brittle. Kevlar® - the polymer used to make bulletproof vests; Kevlar® straps in the arms instead of cables are extremely strong and durable and cant rust. Cables - braided metal strands which are used in the arms; these are usually steel, which rusts, leading the cables to discolor the fabric and eventually break. Cables cannot be replaced because they are internal to the arm and inaccessible. Terms: Installation Understanding a few terms about the positioning and installation of the awning can help determine the appropriate size and installation location for your awning: o Mount - what way or location the awning is affixed to the home or building, such as a wall mount, eave mount, soffit, or roof mount. Pitch - the angle that the awning comes down from the mount point to the front bar. Some lateral arm retractable awnings have an adjustable pitch. Projection - how far out from the wall the awning can extend. Load - the stress put on the awning, from wind, snow, even the weight of the awning itself (dead load). Good quality retractable awnings can sustain wind speeds up to approximately 35mph Pooling - water buildup on the canopy which can cause the fabric to sag and stretch.
How easy an awning is to maintain depends a lot on how it is made, and there are differences between retractable awnings. The fabric on low-quality awnings, particularly cheaper fabrics like canvas and vinyl, is the component most vulnerable to damage: rotting or mildew from rain and humidity, sun exposure, frayed seams, cracking, and fading. Quality retractable awning companies use solution-dyed acrylic, a chemical fiber with the color embedded into it. Solution-dyed acrylic is a woven fabric, so it dries quickly, avoiding mold or mildew. Since is a synthetic fiber, it doesnt rot. And, since the color is part of the fiber itself, it lasts as long as 15 years before being replaced.
UV rays, high wind, gusts, and rain - basically, normal weather - cause the most damage to awnings. Fading, molding, and tearing fabric. Twisting fixed frames from high wind damage or the weight of snow or pooling rain. In only two or three years, fixed awnings and canopies already show substantial wear, which is why the lifetime of most fixed awnings and canopies is only five or six years before the awning need to be replaced. Retractable awnings are closed when not in use, which cuts weather damage. That makes the maintenance much easier on retractable awnings compared to permanent awnings and canopies - there is no need to hunt down replacement parts, replace fabric every couple of years, or attempt to wrangle awnings down and into storage for winter.
For a more thorough cleaning, use a soft-bristled brush and dish soap, working from the bottom up. If there is a persistent stain, mix a quarter cup of soap and a half cup of bleach in one gallon of lukewarm water, and soak the stain for 20 minutes, then rinse.There are some things to avoid when cleaning a retractable awning: Do not use a pressure cleaner, as it will damage the fabric. To prevent mold, mildew, or water stains, make sure that the awning is completely dry before closing it, unless there are high winds. Never use detergent on retractable awning fabric and avoid using the bleach-soap cleaner when possible. Most high quality retractable awning fabrics have several fabric treatments to prevent mildew and stains; harsh cleaners remove that treatment. Avoid heat. Some solution-dyed acrylic fabrics are heat-sensitive and can shrink in steam-cleaning, dryers, and hot water.