Sonya Awning April 05th, 2018 - 08:12:42
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Consider whether the additional cost for a high end retractable awning is worth the additional quality. The functional distinctions between high and low quality retractable awnings are significant: - Commercial (high quality) awnings have non-prorated frame warranties of 25 years and fabric lifetimes as long as 12-15 years, while residential (budget) lines have frame warranties and fabric lifetimes of five years or less. - Commercial grade retractable awnings come in custom sizes, down to an inch measurement, while many residential lines have only a few standard sizes. - Commercial retractable awnings have hundreds of fabrics available, while budget lines usually have much fewer color and pattern options. Additionally, high quality awnings use a woven fabric called solution-dyed acrylic which resists fading, mildew, and rot, while budget awnings use cheap materials such as canvas (which fades quickly) or vinyl (which absorbs the heat and does not breathe).
Seasonal Storage Means Keep It Closed Most awning frame damage comes from some kind of stress, either high winds or gusts which twist the frame or weight from heavy rain, snow, even lots and lots of leaves, which can distend the fabric and bend the frame. It is not necessary to take down a retractable awning to protect it in winter. Just close it. Many retractable awnings have an optional hood, a shield which covers the awning when it is retracted and offers additional protection for the fabric. In winter, it can also be helpful to remove the valance, the strip of fabric which hangs at the front of the awning. What Makes the Difference Retractable awnings are much easier to maintain than fixed awnings or canopies for two major reasons: the fact that the awning retracts and the materials that make it.
There are also dozens of different accessories for retractable awnings which make them easier to operate. A couple of common ones: Anemometer - a device which monitors wind speed; this is used with wind sensors. Sensors - devices which monitor different atmospheric conditions and trigger the motor to retract or extend the awning accordingly; there are four major kinds of sensors, including sun (light) sensors, wind sensors, rain sensors, and motion sensors (which monitor movements, such as wind gusts) Motor - a device which automatically moves the awning; motors are enclosed in the roller tube.Terms: Materials The retractable awning materials are the true indicator of quality - because the kind of materials used translates into quality, not the expense of the materials. For the fabric, there are two major categories of fabrics: