Sonya Awning April 29th, 2018 - 10:43:44
PVC - a hard polymer also used to make plumbing pipes; this tends to be brittle. Kevlar® - the polymer used to make bulletproof vests; Kevlar® straps in the arms instead of cables are extremely strong and durable and cant rust. Cables - braided metal strands which are used in the arms; these are usually steel, which rusts, leading the cables to discolor the fabric and eventually break. Cables cannot be replaced because they are internal to the arm and inaccessible. Terms: Installation Understanding a few terms about the positioning and installation of the awning can help determine the appropriate size and installation location for your awning: o Mount - what way or location the awning is affixed to the home or building, such as a wall mount, eave mount, soffit, or roof mount. Pitch - the angle that the awning comes down from the mount point to the front bar. Some lateral arm retractable awnings have an adjustable pitch. Projection - how far out from the wall the awning can extend. Load - the stress put on the awning, from wind, snow, even the weight of the awning itself (dead load). Good quality retractable awnings can sustain wind speeds up to approximately 35mph Pooling - water buildup on the canopy which can cause the fabric to sag and stretch.
The Different Levels of Retractable Awnings etractable awning companies usually draw distinctions between the different levels of quality which they sell. The highest quality level is for commercial grade retractable awnings. Commercial lines have high-grade manufacturing and use extremely durable, heavy duty materials to increase their lifetimes. The other common designation is residential awning, which are usually less expensive to produce. The less expensive, lower grade materials mean many residential awnings have shorter life spans. One important thing to recognize: The difference between commercial and residential awnings is not because of different styles, sizes, or options. Theres nothing special about a commercial awning that makes it too grand for homes. The difference that sets apart commercial awnings is their superior quality of workmanship and materials.
Arms - the part of the frame which folds closed at the elbow when the awning is retracted (rolls in) and opens when the awning is extended (rolls out). Shoulder - the joints on the retractable awning arms where arms attach to the mounting bar. Front bar - the extrusion at the very front of the awning frame. Hood - a cover which fits over the retractable awning frame and fabric; when the awning is fully retracted, the hood protects the exposed fabric, frame, and motor from the elements. Valance - a strip of fabric, usually a few inches high, which hangs from the front bar of the retractable awning. Rib - the cross bars of the frame which support the awning fabric. Not every awning style has ribs, since ribs are often used to create a shape to the awning frame; for example, lateral arm retractable awnings dont have any ribs. Canopy - an elongated, dome, or waterfall style retractable awning.
Retractable awnings were quick to catch on in Europe, from open air markets to apartments and homes. In fact, the classic lateral arm awning is called a California Style Awning in Europe - and a European Style Awning in the US. Now, the retractable awning market is decidedly driven by Europe. Millions of retractable awnings are sold there annually and are found on the majority of homes and businesses, even being considered in the architectural design process. The highest quality manufacturers, most innovative new designs, and emerging trends are coming from European companies. By comparison, the awning market in America has been limited to mainly commercial buildings. Substantially fewer awnings are sold in the United States yearly - less than 50,000 - so the market, according to the Industrial Fabric Association International, is only about 2% saturated. Theres room for a change.