Sonya Awning April 24th, 2018 - 07:55:25
Arms - the part of the frame which folds closed at the elbow when the awning is retracted (rolls in) and opens when the awning is extended (rolls out). Shoulder - the joints on the retractable awning arms where arms attach to the mounting bar. Front bar - the extrusion at the very front of the awning frame. Hood - a cover which fits over the retractable awning frame and fabric; when the awning is fully retracted, the hood protects the exposed fabric, frame, and motor from the elements. Valance - a strip of fabric, usually a few inches high, which hangs from the front bar of the retractable awning. Rib - the cross bars of the frame which support the awning fabric. Not every awning style has ribs, since ribs are often used to create a shape to the awning frame; for example, lateral arm retractable awnings dont have any ribs. Canopy - an elongated, dome, or waterfall style retractable awning.
Although any retractable awning style is used on homes, most budget lines are limited to a single design. High quality awning lines can offer a half dozen styles or more.- High quality lines offer support for years for parts, even for additional options. Budget lines, particularly at big-box chains, only offer add-ons for a single season and service can lapse within a year, if its even available. When buying budget, the quality of the company becomes much more important. There are some dependable budget retractable awning manufacturers and retailers out there, with solid support, good products, and attractive awning styles. You just have to look.
Retractable awnings were quick to catch on in Europe, from open air markets to apartments and homes. In fact, the classic lateral arm awning is called a California Style Awning in Europe - and a European Style Awning in the US. Now, the retractable awning market is decidedly driven by Europe. Millions of retractable awnings are sold there annually and are found on the majority of homes and businesses, even being considered in the architectural design process. The highest quality manufacturers, most innovative new designs, and emerging trends are coming from European companies. By comparison, the awning market in America has been limited to mainly commercial buildings. Substantially fewer awnings are sold in the United States yearly - less than 50,000 - so the market, according to the Industrial Fabric Association International, is only about 2% saturated. Theres room for a change.
Installation in a Few Easy Steps The general installation process for both traditional retractable awnings and drop screens is pretty simple: attach the correct number of mounting brackets using the appropriate fixing and insert the torsion (square) bar. The simplicity of installing awnings is what makes them ideal for do-it-yourself weekend projects. The exact installation steps, naturally, vary depending on the awning being installed (so always read the manufacturers specific instructions!), but these are the general processes. For a drop screen:1. Assemble the screen itself, putting together the roller (called the headerbox), similar to an old-fashioned shade.2. Install the mounting brackets at the top and around the door frame or the beam of the gazebo or porch.3. Snap in the headerbox, making sure that the bottom rail of the screen is toward the inside of the room.4. If there are vertical side guides, measure and cut them according to the height of the opening, and then screw them in place and snap them in position with the headerbox. If there are guide wires, screw the bottom brackets into place, and attach the wires to the cassette. Be sure everything is level and plumb.