Sonya Awning April 06th, 2018 - 13:17:04
How much shade coverage is required. What the width of the awning should be, based on the shade area. Add at least 12 inches to maximize coverage for sun and rain protection. How far out the awning extends (the projection), based on the shade area. There is a natural slope to an awning, so the actual shade is several inches shorter than the full projection. How high to mount the awning. Because of the awnings slope, the front of the awning is lower than the mounting position; this difference is the drop. The recommended drop is 3 inches per foot of projection. So, if the awning has a 12-foot projection, the drop is about 36 inches. To get a 7-foot clearance under the front bar, the awning has to be mounted at least 10 feet high. Scout out a mounting place that is free of obstructions (no lights, gutters, wiring, or ornamentation) and has adequate clearance around any doors or windows. For screens, make sure that any doors swing away from the screen. For retractable awnings, make sure the awning can extend its full projection without running into a tree, patio, roofline, or fence.
Here are a few helpful tips for installations: Always attach retractable awning mounting brackets to a load-bearing part of the building, like a stud, joist, rafter, brick, or beam, depending on the mounting option. Use a chalk line and level. Its just easier than trying to eyeball whether the awning or screen is even. Because of the weight of the awning and to keep everything properly positioned, have two people working on the retractable awning installation. Read the instructions in the kit or on the companys website. When in doubt, call the manufacturers customer service line.In a decent afternoon of work, you can have a lovely retractable awning or drop screen installed over a patio, garden, eating area, walkway - wherever you want to make a pleasing, comfortably shaded haven.
Installation in a Few Easy Steps The general installation process for both traditional retractable awnings and drop screens is pretty simple: attach the correct number of mounting brackets using the appropriate fixing and insert the torsion (square) bar. The simplicity of installing awnings is what makes them ideal for do-it-yourself weekend projects. The exact installation steps, naturally, vary depending on the awning being installed (so always read the manufacturers specific instructions!), but these are the general processes. For a drop screen:1. Assemble the screen itself, putting together the roller (called the headerbox), similar to an old-fashioned shade.2. Install the mounting brackets at the top and around the door frame or the beam of the gazebo or porch.3. Snap in the headerbox, making sure that the bottom rail of the screen is toward the inside of the room.4. If there are vertical side guides, measure and cut them according to the height of the opening, and then screw them in place and snap them in position with the headerbox. If there are guide wires, screw the bottom brackets into place, and attach the wires to the cassette. Be sure everything is level and plumb.
There are also dozens of different accessories for retractable awnings which make them easier to operate. A couple of common ones: Anemometer - a device which monitors wind speed; this is used with wind sensors. Sensors - devices which monitor different atmospheric conditions and trigger the motor to retract or extend the awning accordingly; there are four major kinds of sensors, including sun (light) sensors, wind sensors, rain sensors, and motion sensors (which monitor movements, such as wind gusts) Motor - a device which automatically moves the awning; motors are enclosed in the roller tube.Terms: Materials The retractable awning materials are the true indicator of quality - because the kind of materials used translates into quality, not the expense of the materials. For the fabric, there are two major categories of fabrics: