Sonya Awning April 29th, 2018 - 11:13:07
Arms - the part of the frame which folds closed at the elbow when the awning is retracted (rolls in) and opens when the awning is extended (rolls out). Shoulder - the joints on the retractable awning arms where arms attach to the mounting bar. Front bar - the extrusion at the very front of the awning frame. Hood - a cover which fits over the retractable awning frame and fabric; when the awning is fully retracted, the hood protects the exposed fabric, frame, and motor from the elements. Valance - a strip of fabric, usually a few inches high, which hangs from the front bar of the retractable awning. Rib - the cross bars of the frame which support the awning fabric. Not every awning style has ribs, since ribs are often used to create a shape to the awning frame; for example, lateral arm retractable awnings dont have any ribs. Canopy - an elongated, dome, or waterfall style retractable awning.
Retractable awnings are a great sun protection system: durable, low maintenance, energy efficient, and low cost. Using retractable awnings also offers specific benefits to business owners in two ways: capital improvements that maximize the appeal and functionality of a building and an improved customer experience that gives shoppers, visitors, and passers-by a more pleasant and enjoyable experience in front of a store or building. Fixed and Retractable Awnings: Whats the Difference for Business? Traditionally, fixed awnings have been the mainstays of commercial awnings, but retractable awnings are becoming an increasingly appealing option as awareness of retractable sun protection systems grows for an important reason.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Differences in Style The different reasons for retractable awning use in Europe and the US have produced different emphases on style. Because awnings had a stylistic influence in European history which transitioned to efficiency uses, European awning fabrics and designs tend to be more dramatic and flamboyant. For example, European fabric lines average about 400 fabric designs, while American lines average 200. Color choices in Europe tend to be lighter and brighter. American homeowners, approaching retractable awnings as a functional addition to a house, without the stylistic background, tend to be conservative, choosing fabrics in blacks and grays in sedate stripes and staying with more traditional frame styles.