Sonya Awning April 06th, 2018 - 12:11:51
Installation in a Few Easy Steps The general installation process for both traditional retractable awnings and drop screens is pretty simple: attach the correct number of mounting brackets using the appropriate fixing and insert the torsion (square) bar. The simplicity of installing awnings is what makes them ideal for do-it-yourself weekend projects. The exact installation steps, naturally, vary depending on the awning being installed (so always read the manufacturers specific instructions!), but these are the general processes. For a drop screen:1. Assemble the screen itself, putting together the roller (called the headerbox), similar to an old-fashioned shade.2. Install the mounting brackets at the top and around the door frame or the beam of the gazebo or porch.3. Snap in the headerbox, making sure that the bottom rail of the screen is toward the inside of the room.4. If there are vertical side guides, measure and cut them according to the height of the opening, and then screw them in place and snap them in position with the headerbox. If there are guide wires, screw the bottom brackets into place, and attach the wires to the cassette. Be sure everything is level and plumb.
PVC - a hard polymer also used to make plumbing pipes; this tends to be brittle. Kevlar® - the polymer used to make bulletproof vests; Kevlar® straps in the arms instead of cables are extremely strong and durable and cant rust. Cables - braided metal strands which are used in the arms; these are usually steel, which rusts, leading the cables to discolor the fabric and eventually break. Cables cannot be replaced because they are internal to the arm and inaccessible. Terms: Installation Understanding a few terms about the positioning and installation of the awning can help determine the appropriate size and installation location for your awning: o Mount - what way or location the awning is affixed to the home or building, such as a wall mount, eave mount, soffit, or roof mount. Pitch - the angle that the awning comes down from the mount point to the front bar. Some lateral arm retractable awnings have an adjustable pitch. Projection - how far out from the wall the awning can extend. Load - the stress put on the awning, from wind, snow, even the weight of the awning itself (dead load). Good quality retractable awnings can sustain wind speeds up to approximately 35mph Pooling - water buildup on the canopy which can cause the fabric to sag and stretch.
Seasonal Storage Means Keep It Closed Most awning frame damage comes from some kind of stress, either high winds or gusts which twist the frame or weight from heavy rain, snow, even lots and lots of leaves, which can distend the fabric and bend the frame. It is not necessary to take down a retractable awning to protect it in winter. Just close it. Many retractable awnings have an optional hood, a shield which covers the awning when it is retracted and offers additional protection for the fabric. In winter, it can also be helpful to remove the valance, the strip of fabric which hangs at the front of the awning. What Makes the Difference Retractable awnings are much easier to maintain than fixed awnings or canopies for two major reasons: the fact that the awning retracts and the materials that make it.
Extra square footage. Retractable awnings can be used in a variety of applications and have virtually unlimited uses from ticket booths and ATM kiosks to smoking areas and employee break areas. This provides comfortable exterior spaces without extra construction costs. Tax deductible capital improvement. Municipal incentives. Retractable awnings even fall under many municipal capital improvement programs: cities like Norfolk, Virginia; Austin, Texas; San Jose, Calif.; and Philadelphia, all have small business and downtown development programs which offer incentives on capital improvement projects - and all specifically mention awnings as desirable (and incentivized) options. A municipal program can pay anywhere from 25% to 50% of the cost of the retractable awning.