Sonya Awning March 31st, 2018 - 11:47:30
Installation in a Few Easy Steps The general installation process for both traditional retractable awnings and drop screens is pretty simple: attach the correct number of mounting brackets using the appropriate fixing and insert the torsion (square) bar. The simplicity of installing awnings is what makes them ideal for do-it-yourself weekend projects. The exact installation steps, naturally, vary depending on the awning being installed (so always read the manufacturers specific instructions!), but these are the general processes. For a drop screen:1. Assemble the screen itself, putting together the roller (called the headerbox), similar to an old-fashioned shade.2. Install the mounting brackets at the top and around the door frame or the beam of the gazebo or porch.3. Snap in the headerbox, making sure that the bottom rail of the screen is toward the inside of the room.4. If there are vertical side guides, measure and cut them according to the height of the opening, and then screw them in place and snap them in position with the headerbox. If there are guide wires, screw the bottom brackets into place, and attach the wires to the cassette. Be sure everything is level and plumb.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Energy saving: The result of installing awnings should be reflected in the power bill. A good awning can save 100 hours of energy consumption per month. However, you need to plan and install the awnings properly so that the system provides you with adequate heat protection. Home decoration: The awning should look nice on the walls; thats perhaps the most important quality of an awning. Consult a designer or architect and make sure to know what color combination and style would look aesthetically correct on the walls of your home. Durable: This is a quality all consumers look in whatever they use! To make utmost use of the awning, go for retractable ones. They can be pulled back when the weather is harsh and thus you can ensure a longer life of your awning.
That is starting to change, though. More and more American consumers are asking about vibrant colors or patterns - like florals and even paisleys - when they look at awning fabrics, and more exotic designs are starting to come over from Europe, at least for high-end use. As energy efficiency becomes more common, it could become more natural to look for stylish, as well as functional, solutions, which will broaden the retractable awning market even more. What the Future Holds As energy efficiency continues to be a growing issue for American homeowners, retractable awnings will be a new opportunity to explore. Based on the experiences and widespread effectiveness observed in Europe, there are exciting changes in store for American markets in the next few years: new architectural design integration with new construction, wildly expanding fabric choices and styles, new retractable awning designs, and natural energy efficiency.