Sonya Awning April 06th, 2018 - 12:06:25
Arms - the part of the frame which folds closed at the elbow when the awning is retracted (rolls in) and opens when the awning is extended (rolls out). Shoulder - the joints on the retractable awning arms where arms attach to the mounting bar. Front bar - the extrusion at the very front of the awning frame. Hood - a cover which fits over the retractable awning frame and fabric; when the awning is fully retracted, the hood protects the exposed fabric, frame, and motor from the elements. Valance - a strip of fabric, usually a few inches high, which hangs from the front bar of the retractable awning. Rib - the cross bars of the frame which support the awning fabric. Not every awning style has ribs, since ribs are often used to create a shape to the awning frame; for example, lateral arm retractable awnings dont have any ribs. Canopy - an elongated, dome, or waterfall style retractable awning.
How easy an awning is to maintain depends a lot on how it is made, and there are differences between retractable awnings. The fabric on low-quality awnings, particularly cheaper fabrics like canvas and vinyl, is the component most vulnerable to damage: rotting or mildew from rain and humidity, sun exposure, frayed seams, cracking, and fading. Quality retractable awning companies use solution-dyed acrylic, a chemical fiber with the color embedded into it. Solution-dyed acrylic is a woven fabric, so it dries quickly, avoiding mold or mildew. Since is a synthetic fiber, it doesnt rot. And, since the color is part of the fiber itself, it lasts as long as 15 years before being replaced.
Window Awnings are available in traditional and contemporary styles. Traditional style window awnings have sides that will give you more sun protections than awnings without sides. Awnings with sides are especially needed for East and West facing windows. Spear Window Awnings are made with wrought iron frames with spear finials. Spear Awnings look great on adobe and more modern homes. Drop arm Awnings for windows roll up on a roller tube and can be motorized. Drop Arm Awnings with motors are convenient for second story windows so they can be retracted easily from indoors. Porch Awnings around the perimeter of your porch adds privacy and protection. Porch Awnings can keep your porch cool will protecting it from rain and the sun. You can use Window Awnings around a porch or Canvas Porch Roller Curtains which will can roll up and down with a simple rope and pulley system. Porch Valances are also a popular decorative addition to porches. These Canvas Valances are for decorative purposes but do not have much sun protection because they are a small accent to a porch. They are 12" - 14" tall and wrap around a porch to add color and will soften the hard lines of a porch. They are especially popular on coastal homes on the East coast.
How much shade coverage is required. What the width of the awning should be, based on the shade area. Add at least 12 inches to maximize coverage for sun and rain protection. How far out the awning extends (the projection), based on the shade area. There is a natural slope to an awning, so the actual shade is several inches shorter than the full projection. How high to mount the awning. Because of the awnings slope, the front of the awning is lower than the mounting position; this difference is the drop. The recommended drop is 3 inches per foot of projection. So, if the awning has a 12-foot projection, the drop is about 36 inches. To get a 7-foot clearance under the front bar, the awning has to be mounted at least 10 feet high. Scout out a mounting place that is free of obstructions (no lights, gutters, wiring, or ornamentation) and has adequate clearance around any doors or windows. For screens, make sure that any doors swing away from the screen. For retractable awnings, make sure the awning can extend its full projection without running into a tree, patio, roofline, or fence.