Sonya Awning April 06th, 2018 - 11:53:12
Specifically for retractable awnings, most Asian-produced lines are imitative rather than original, meaning they use standard designs done on the cheap without any engineering design or engineering drawings. In addition, almost all Asian vendors lacks TÜV or Eurolab certifications. Thats not to say that every budget line is bad. Obviously, price is a factor (though it becomes less of a factor when the usable life of a budget awning is about a quarter of a commercial/high-end awning). Also, a few companies focusing on residential lines put the effort in meeting with Asian manufacturers at trade shows, even touring their facilities. Even with budget lines, the quality of the company is reflected in their service agreements, return policies, and customer service.
Awning manufacturers have a shorthand jargon that succinctly describes their awnings characteristics, quality, function, even style. Knowledge is the key to having an efficient (and enjoyable) online shopping experience for retractable awnings. These simplified common terms can help you know in advance what youre looking at, so you know how to find what you want. Terms: Parts A lateral arm retractable awning is an awning which can be rolled up and closed; unlike fixed awnings and canopies, a retractable awning has no support posts. A retractable awning has an intrinsically simple design: o Frame - the skeleton of the awning; the frame is comprised of the mounting bar, arms, and roller tube. Mounting bar - the base of the retractable awning which is mounted in place; when the awning is retracted, the awning fabric rolls around the roller tube attached to the mounting bar.
Awnings have been common for more than 2000 years; retractable awnings have been around for almost 150 years. While the history of using awnings stretches far back in Europe and retractable awnings are commonly used there today, theyre rare in the United States - despite the fact that retractable awnings were invented in the US. This uneven adoption has led to an exposure of design options in Europe - intricate frames, new types of retractable frames, bold colors, and luscious patterns - while America, treating awnings as a practical afterthought, has stayed more conservative. A Quick History Some form of awnings has been around for millennia, starting in Egypt and the Middle East and spreading across the Roman Empire. Most of those were fixed canopies of mats, skins, or fabric bolts hung over poles. In the mid-1800s, shop owners began using movable awnings, which simply bunched up the fabric when it was taken down. In the latter part of the century, they began rolling awnings on a tube, cleanly retracting them and keeping the fabric safe. With minor variation, this is the same basic design used today on lateral arm retractable awnings.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.