Sonya Awning April 06th, 2018 - 12:05:55
Seasonal Storage Means Keep It Closed Most awning frame damage comes from some kind of stress, either high winds or gusts which twist the frame or weight from heavy rain, snow, even lots and lots of leaves, which can distend the fabric and bend the frame. It is not necessary to take down a retractable awning to protect it in winter. Just close it. Many retractable awnings have an optional hood, a shield which covers the awning when it is retracted and offers additional protection for the fabric. In winter, it can also be helpful to remove the valance, the strip of fabric which hangs at the front of the awning. What Makes the Difference Retractable awnings are much easier to maintain than fixed awnings or canopies for two major reasons: the fact that the awning retracts and the materials that make it.
Bettering the Customer Experience Retractable awnings can create a more pleasant outdoor experience. This has subtle but tangible effects on customers. The area around entrances is cooler and shaded, protected from rain, and generally more pleasant to be in. The primary function of a better customer experience is better foot traffic. The stylishness of the awning makes customers want to browse, and the glare, heat, and rain protection makes it more comfortable for them to do so. The sun protection has a dual utility, though. The UV protection (since suns rays never reach the interior) preserves window displays and interior furnishings and prevents fading. Even the inside of the store is more appealing for customers, and the heavy investment in signs and merchandise is protected from passive sun damage.
PVC - a hard polymer also used to make plumbing pipes; this tends to be brittle. Kevlar® - the polymer used to make bulletproof vests; Kevlar® straps in the arms instead of cables are extremely strong and durable and cant rust. Cables - braided metal strands which are used in the arms; these are usually steel, which rusts, leading the cables to discolor the fabric and eventually break. Cables cannot be replaced because they are internal to the arm and inaccessible. Terms: Installation Understanding a few terms about the positioning and installation of the awning can help determine the appropriate size and installation location for your awning: o Mount - what way or location the awning is affixed to the home or building, such as a wall mount, eave mount, soffit, or roof mount. Pitch - the angle that the awning comes down from the mount point to the front bar. Some lateral arm retractable awnings have an adjustable pitch. Projection - how far out from the wall the awning can extend. Load - the stress put on the awning, from wind, snow, even the weight of the awning itself (dead load). Good quality retractable awnings can sustain wind speeds up to approximately 35mph Pooling - water buildup on the canopy which can cause the fabric to sag and stretch.
Also, retractable awnings have financial benefits over fixed awnings that make them a tempting solution: Retractable awnings are overall less expensive than fixed awnings to install, and they dont require a contractor. Retractable awnings are about a quarter to a third of the cost of permanent construction to cover and utilize the same square footage. Because many styles of retractable awning arms are spring-loaded, there are no support posts to install, to block the view from under the awning, or to act as a potential hazard for children and pets. They require virtually no maintenance, not even mandatory cleaning.Capital Improvement Advantage Retractable awnings have interesting ways of saving a business money: o Direct energy cost savings. Sun protection systems cut heat buildup in a room as much as 77%, translating into a direct utility bill savings of up to 25%. "Dual use" as signage and promotion. Business names, logos, and telephone numbers can be printed on the awning, which saves money on constructing and designing separate signs.