Sonya Awning April 20th, 2018 - 12:33:44
Window Awnings are available in traditional and contemporary styles. Traditional style window awnings have sides that will give you more sun protections than awnings without sides. Awnings with sides are especially needed for East and West facing windows. Spear Window Awnings are made with wrought iron frames with spear finials. Spear Awnings look great on adobe and more modern homes. Drop arm Awnings for windows roll up on a roller tube and can be motorized. Drop Arm Awnings with motors are convenient for second story windows so they can be retracted easily from indoors. Porch Awnings around the perimeter of your porch adds privacy and protection. Porch Awnings can keep your porch cool will protecting it from rain and the sun. You can use Window Awnings around a porch or Canvas Porch Roller Curtains which will can roll up and down with a simple rope and pulley system. Porch Valances are also a popular decorative addition to porches. These Canvas Valances are for decorative purposes but do not have much sun protection because they are a small accent to a porch. They are 12" - 14" tall and wrap around a porch to add color and will soften the hard lines of a porch. They are especially popular on coastal homes on the East coast.
Usually, then, when a company advertises a "residential awning," theyre signaling that this is a budget line, while "commercial grade awnings" represent high-end lines. Manufacturing Regions and Differences in Quality here are three important manufacturing regions for retractable awnings: Europe, North America, and Asia (mainly China). Each of these manufacturing regions corresponds almost directly to the awning quality: The highest quality retractable awnings are manufactured in Europe, midrange awnings in America, and budget lower quality awnings in China. Most awning companies in the USA sell either commercial awnings from Europe or budget lines from China.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Commercial Awnings: With soaring price rates, commercial houses and businesses have to spend a lot on overheads and miscellaneous accounts. Businesses are also experiencing the problem of high energy cost. Installing awning can fetch them the monetary benefit as well. So here again sun control and power saving play vital role. However, most delicate quality of commercial awnings is brand-compliance. All businesses have a brand color, brand logo and brand style. The awnings should be in line with these factors. Top of that, all the businesses have discrete themes, like health care, shopping mall, restaurant, book store, drugstore, coffee shop etc. So the awning should go with the theme of the business as well. Otherwise the shades would not look good and damage both the outlook of the building and the image of the business.