Sonya Awning April 29th, 2018 - 12:12:34
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Commercial Awnings: With soaring price rates, commercial houses and businesses have to spend a lot on overheads and miscellaneous accounts. Businesses are also experiencing the problem of high energy cost. Installing awning can fetch them the monetary benefit as well. So here again sun control and power saving play vital role. However, most delicate quality of commercial awnings is brand-compliance. All businesses have a brand color, brand logo and brand style. The awnings should be in line with these factors. Top of that, all the businesses have discrete themes, like health care, shopping mall, restaurant, book store, drugstore, coffee shop etc. So the awning should go with the theme of the business as well. Otherwise the shades would not look good and damage both the outlook of the building and the image of the business.
In addition to the practical reasons, Europe has had a long aesthetic tradition with awnings, so retractable awnings are a natural part of any home design, and that organically led into creative and adventurous designs, which made using awnings even more appealing. The US, on the other hand, has had historically cheap and accessible energy, with widespread air conditioning and central air systems. Combined with suburb-motivated home designs, neither energy nor aesthetics has given a compelling reason to include retractable awnings on homes as a standard practice. Energy shortages and price increases in the 1970s, though, did begin bringing retractable awnings to the popular mind as a functional solution for energy efficiency.
How much shade coverage is required. What the width of the awning should be, based on the shade area. Add at least 12 inches to maximize coverage for sun and rain protection. How far out the awning extends (the projection), based on the shade area. There is a natural slope to an awning, so the actual shade is several inches shorter than the full projection. How high to mount the awning. Because of the awnings slope, the front of the awning is lower than the mounting position; this difference is the drop. The recommended drop is 3 inches per foot of projection. So, if the awning has a 12-foot projection, the drop is about 36 inches. To get a 7-foot clearance under the front bar, the awning has to be mounted at least 10 feet high. Scout out a mounting place that is free of obstructions (no lights, gutters, wiring, or ornamentation) and has adequate clearance around any doors or windows. For screens, make sure that any doors swing away from the screen. For retractable awnings, make sure the awning can extend its full projection without running into a tree, patio, roofline, or fence.