Sonya Awning April 29th, 2018 - 11:23:16
How much shade coverage is required. What the width of the awning should be, based on the shade area. Add at least 12 inches to maximize coverage for sun and rain protection. How far out the awning extends (the projection), based on the shade area. There is a natural slope to an awning, so the actual shade is several inches shorter than the full projection. How high to mount the awning. Because of the awnings slope, the front of the awning is lower than the mounting position; this difference is the drop. The recommended drop is 3 inches per foot of projection. So, if the awning has a 12-foot projection, the drop is about 36 inches. To get a 7-foot clearance under the front bar, the awning has to be mounted at least 10 feet high. Scout out a mounting place that is free of obstructions (no lights, gutters, wiring, or ornamentation) and has adequate clearance around any doors or windows. For screens, make sure that any doors swing away from the screen. For retractable awnings, make sure the awning can extend its full projection without running into a tree, patio, roofline, or fence.
Retractable awnings offer a slew of advantages over fixed awnings, from easy installation to longer lifetimes. As the name indicates, retractable awnings retract, folding to help control the placement of the shade or to protect the awning. Because of their durability, retractable awnings can be long-term fixtures on the exterior of a home or commercial building, providing better outdoor living and working spaces; offering, sun, heat, glare and ultraviolet ray (UV) protection; and enhancing exterior appeal. Finding Purpose: Uses for Retractable Awnings Retractable awnings are most commonly used for element protection. Over 70% of awnings are purchased specifically to provide shade. This shade is primarily for comfort, to cut down on the brightness of the sun, cool off outdoor ambient temperatures, and make entrances more welcoming, but there are other benefits as well:
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Specifically for retractable awnings, most Asian-produced lines are imitative rather than original, meaning they use standard designs done on the cheap without any engineering design or engineering drawings. In addition, almost all Asian vendors lacks TÜV or Eurolab certifications. Thats not to say that every budget line is bad. Obviously, price is a factor (though it becomes less of a factor when the usable life of a budget awning is about a quarter of a commercial/high-end awning). Also, a few companies focusing on residential lines put the effort in meeting with Asian manufacturers at trade shows, even touring their facilities. Even with budget lines, the quality of the company is reflected in their service agreements, return policies, and customer service.