Home / Awning / fab awning window parts image / Window Parts Names How To Fix A Crank Window That Won T Open Double Hung Window Replacement Parts Casement Window Part Names Aluminum Sliding Window Parts
Sonya Awning April 23rd, 2018 - 11:15:35
PVC - a hard polymer also used to make plumbing pipes; this tends to be brittle. Kevlar® - the polymer used to make bulletproof vests; Kevlar® straps in the arms instead of cables are extremely strong and durable and cant rust. Cables - braided metal strands which are used in the arms; these are usually steel, which rusts, leading the cables to discolor the fabric and eventually break. Cables cannot be replaced because they are internal to the arm and inaccessible. Terms: Installation Understanding a few terms about the positioning and installation of the awning can help determine the appropriate size and installation location for your awning: o Mount - what way or location the awning is affixed to the home or building, such as a wall mount, eave mount, soffit, or roof mount. Pitch - the angle that the awning comes down from the mount point to the front bar. Some lateral arm retractable awnings have an adjustable pitch. Projection - how far out from the wall the awning can extend. Load - the stress put on the awning, from wind, snow, even the weight of the awning itself (dead load). Good quality retractable awnings can sustain wind speeds up to approximately 35mph Pooling - water buildup on the canopy which can cause the fabric to sag and stretch.
There are dozens of styles of retractable awnings, determined mainly by the frame shape: Lateral arm awning - the most common, and oldest, retractable awning style, consisting simply of two or more arms, the front bar, mounting bar and the fabric. This is the most popular style for homes and commercial buildings; this is also the most scalable style, extending (projecting) as far as 17 feet without external supports. Dome - an awning with curved ribs, which forms a rounded shape when fully extended; these tend to have a significantly shorter extension (projection) than lateral arm awnings, extending only about five feet out maximum from the mount point. An elongated dome can have a longer projection than a standard dome style, almost double. Dome awnings are common for commercial properties and for window and door awnings. Drop screen - a kind of retractable awning which is mounted vertically so it extends downward. This style of awning has the mounting bar and fabric, but no arms since it simply "drops" down. This is mainly used to screen patios, gazebos, and other outdoor areas from glare, heat, rain, UV rays, direct sun, mosquitoes, and pollen.
European lines have the highest quality, partly because awnings have been used in Europe for thousands of years and are tightly integrated with building design concepts. This long history has led to the best designed and manufactured awnings available: Tight manufacturing standards- Internationalized, rigorous QA testing standards- Certification processes for materials- Durable material quality for frames, fabrics, and threads- Continuously evolving styles, features, and development On the other hand, most budget (residential) retractable awnings tend to be made in China, an area plagued by consistent complaints about poor quality control, poor materials, and poor labor. With budget lines, product quality, sometimes even product materials, varies significantly between lots. - Lower quality materials- Lack of testing or certifications- Limited styles- Inconsistent manufacturing quality.
A drop screen usually enhances an existing structural feature, such as a door or window, or as panels to enclose a porch, lanai, or gazebo. A drop screen requires a sturdy beam to mount to and possibly a door frame or post to fix the side guides to. After finding the location, simply measure the width of the area from side to side on the interior of the frame (for an inside mount) and add for the width of the side guides if mounted outside the window frame. Then measure the height of the screen, going from the inside (or bottom) of the top frame to the bottom of the threshold for the height; for an outside mount, add the size of the headerbox and bottom rail to the height measurement. Finding an ideal retractable awning location has a few other factors to consider.