Sonya Awning April 28th, 2018 - 11:26:05
PVC - a hard polymer also used to make plumbing pipes; this tends to be brittle. Kevlar® - the polymer used to make bulletproof vests; Kevlar® straps in the arms instead of cables are extremely strong and durable and cant rust. Cables - braided metal strands which are used in the arms; these are usually steel, which rusts, leading the cables to discolor the fabric and eventually break. Cables cannot be replaced because they are internal to the arm and inaccessible. Terms: Installation Understanding a few terms about the positioning and installation of the awning can help determine the appropriate size and installation location for your awning: o Mount - what way or location the awning is affixed to the home or building, such as a wall mount, eave mount, soffit, or roof mount. Pitch - the angle that the awning comes down from the mount point to the front bar. Some lateral arm retractable awnings have an adjustable pitch. Projection - how far out from the wall the awning can extend. Load - the stress put on the awning, from wind, snow, even the weight of the awning itself (dead load). Good quality retractable awnings can sustain wind speeds up to approximately 35mph Pooling - water buildup on the canopy which can cause the fabric to sag and stretch.
Awnings are great additions on the outer walls of the premises. Apart from providing sufficient element protection, awnings add to the outlook of any premise. One needs to choose the color, style and pattern of the awnings in accordance with the exterior of the building. Modern awning companies offer a lot of color shades, styles, pattern, textures and type of fabrics to choose from. You can rest assured that all your requirements would be satisfied once you find a reputed awning manufacturer. However, before you start sketching the style of the awnings, it would be better to know about the basic two categories of awnings. Based on the places of use awnings can be broadly classified under two headings - Residential and Commercial.
Types of Awnings There are several types of awnings you can use on your home. There are different styles for all uses around your home. You will find the higher end Sunbrella Fabric Awnings, may cost a bit more to purchase, but in the long run they last so much longer they will actually cost you less per year. Lets take a look at the different types and styles of awnings. Retractable Patio Awnings used to be seen only on upscale homes. Now they are more affordable and can last for years without needing any maintenance. These Retractable Awnings can be easily retracted or extended with a hand crank or motor. Motors are available with remotes and wind sensors that will retract the awning automatically in case a sudden storm comes and the awning was left extended. They are also great for outdoor entertaining and will keep any large slider or French doors shaded so your home stays cooler.
How much shade coverage is required. What the width of the awning should be, based on the shade area. Add at least 12 inches to maximize coverage for sun and rain protection. How far out the awning extends (the projection), based on the shade area. There is a natural slope to an awning, so the actual shade is several inches shorter than the full projection. How high to mount the awning. Because of the awnings slope, the front of the awning is lower than the mounting position; this difference is the drop. The recommended drop is 3 inches per foot of projection. So, if the awning has a 12-foot projection, the drop is about 36 inches. To get a 7-foot clearance under the front bar, the awning has to be mounted at least 10 feet high. Scout out a mounting place that is free of obstructions (no lights, gutters, wiring, or ornamentation) and has adequate clearance around any doors or windows. For screens, make sure that any doors swing away from the screen. For retractable awnings, make sure the awning can extend its full projection without running into a tree, patio, roofline, or fence.