Sonya Awning April 21st, 2018 - 11:30:46
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Awnings are great additions on the outer walls of the premises. Apart from providing sufficient element protection, awnings add to the outlook of any premise. One needs to choose the color, style and pattern of the awnings in accordance with the exterior of the building. Modern awning companies offer a lot of color shades, styles, pattern, textures and type of fabrics to choose from. You can rest assured that all your requirements would be satisfied once you find a reputed awning manufacturer. However, before you start sketching the style of the awnings, it would be better to know about the basic two categories of awnings. Based on the places of use awnings can be broadly classified under two headings - Residential and Commercial.
Specifically for retractable awnings, most Asian-produced lines are imitative rather than original, meaning they use standard designs done on the cheap without any engineering design or engineering drawings. In addition, almost all Asian vendors lacks TÜV or Eurolab certifications. Thats not to say that every budget line is bad. Obviously, price is a factor (though it becomes less of a factor when the usable life of a budget awning is about a quarter of a commercial/high-end awning). Also, a few companies focusing on residential lines put the effort in meeting with Asian manufacturers at trade shows, even touring their facilities. Even with budget lines, the quality of the company is reflected in their service agreements, return policies, and customer service.
Window Awnings are available in traditional and contemporary styles. Traditional style window awnings have sides that will give you more sun protections than awnings without sides. Awnings with sides are especially needed for East and West facing windows. Spear Window Awnings are made with wrought iron frames with spear finials. Spear Awnings look great on adobe and more modern homes. Drop arm Awnings for windows roll up on a roller tube and can be motorized. Drop Arm Awnings with motors are convenient for second story windows so they can be retracted easily from indoors. Porch Awnings around the perimeter of your porch adds privacy and protection. Porch Awnings can keep your porch cool will protecting it from rain and the sun. You can use Window Awnings around a porch or Canvas Porch Roller Curtains which will can roll up and down with a simple rope and pulley system. Porch Valances are also a popular decorative addition to porches. These Canvas Valances are for decorative purposes but do not have much sun protection because they are a small accent to a porch. They are 12" - 14" tall and wrap around a porch to add color and will soften the hard lines of a porch. They are especially popular on coastal homes on the East coast.