Sonya Awning April 06th, 2018 - 13:05:27
How easy an awning is to maintain depends a lot on how it is made, and there are differences between retractable awnings. The fabric on low-quality awnings, particularly cheaper fabrics like canvas and vinyl, is the component most vulnerable to damage: rotting or mildew from rain and humidity, sun exposure, frayed seams, cracking, and fading. Quality retractable awning companies use solution-dyed acrylic, a chemical fiber with the color embedded into it. Solution-dyed acrylic is a woven fabric, so it dries quickly, avoiding mold or mildew. Since is a synthetic fiber, it doesnt rot. And, since the color is part of the fiber itself, it lasts as long as 15 years before being replaced.
PVC - a hard polymer also used to make plumbing pipes; this tends to be brittle. Kevlar® - the polymer used to make bulletproof vests; Kevlar® straps in the arms instead of cables are extremely strong and durable and cant rust. Cables - braided metal strands which are used in the arms; these are usually steel, which rusts, leading the cables to discolor the fabric and eventually break. Cables cannot be replaced because they are internal to the arm and inaccessible. Terms: Installation Understanding a few terms about the positioning and installation of the awning can help determine the appropriate size and installation location for your awning: o Mount - what way or location the awning is affixed to the home or building, such as a wall mount, eave mount, soffit, or roof mount. Pitch - the angle that the awning comes down from the mount point to the front bar. Some lateral arm retractable awnings have an adjustable pitch. Projection - how far out from the wall the awning can extend. Load - the stress put on the awning, from wind, snow, even the weight of the awning itself (dead load). Good quality retractable awnings can sustain wind speeds up to approximately 35mph Pooling - water buildup on the canopy which can cause the fabric to sag and stretch.
Other retractable awning features impact how well the awning wears, and, therefore, how easy it is to maintain: Electro-statically powder-coated aluminum frames to resist corrosion and chipping Sealed and self-lubricating retractable awning motors Weather-sealed wind, motion, rain, and sun sensors and other accessories Stainless-steel mounting hardware to prevent staining or bleeding from rust Kevlar® brand straps in the arms, not steel cables which will rust TÜV product approved and Eurolab certified frames These components make the average lifetime of a retractable awning 12-15 years for fabric and 25 years for the frame - almost five times longer than most fixed awnings or canopies, and without the need to professional cleaning or seasonal storage problems. With retractable awnings, the keyword for maintenance is effortless.
Seasonal Storage Means Keep It Closed Most awning frame damage comes from some kind of stress, either high winds or gusts which twist the frame or weight from heavy rain, snow, even lots and lots of leaves, which can distend the fabric and bend the frame. It is not necessary to take down a retractable awning to protect it in winter. Just close it. Many retractable awnings have an optional hood, a shield which covers the awning when it is retracted and offers additional protection for the fabric. In winter, it can also be helpful to remove the valance, the strip of fabric which hangs at the front of the awning. What Makes the Difference Retractable awnings are much easier to maintain than fixed awnings or canopies for two major reasons: the fact that the awning retracts and the materials that make it.