Sonya Awning April 29th, 2018 - 11:05:01
Energy saving: The result of installing awnings should be reflected in the power bill. A good awning can save 100 hours of energy consumption per month. However, you need to plan and install the awnings properly so that the system provides you with adequate heat protection. Home decoration: The awning should look nice on the walls; thats perhaps the most important quality of an awning. Consult a designer or architect and make sure to know what color combination and style would look aesthetically correct on the walls of your home. Durable: This is a quality all consumers look in whatever they use! To make utmost use of the awning, go for retractable ones. They can be pulled back when the weather is harsh and thus you can ensure a longer life of your awning.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
How much shade coverage is required. What the width of the awning should be, based on the shade area. Add at least 12 inches to maximize coverage for sun and rain protection. How far out the awning extends (the projection), based on the shade area. There is a natural slope to an awning, so the actual shade is several inches shorter than the full projection. How high to mount the awning. Because of the awnings slope, the front of the awning is lower than the mounting position; this difference is the drop. The recommended drop is 3 inches per foot of projection. So, if the awning has a 12-foot projection, the drop is about 36 inches. To get a 7-foot clearance under the front bar, the awning has to be mounted at least 10 feet high. Scout out a mounting place that is free of obstructions (no lights, gutters, wiring, or ornamentation) and has adequate clearance around any doors or windows. For screens, make sure that any doors swing away from the screen. For retractable awnings, make sure the awning can extend its full projection without running into a tree, patio, roofline, or fence.
Awnings have been common for more than 2000 years; retractable awnings have been around for almost 150 years. While the history of using awnings stretches far back in Europe and retractable awnings are commonly used there today, theyre rare in the United States - despite the fact that retractable awnings were invented in the US. This uneven adoption has led to an exposure of design options in Europe - intricate frames, new types of retractable frames, bold colors, and luscious patterns - while America, treating awnings as a practical afterthought, has stayed more conservative. A Quick History Some form of awnings has been around for millennia, starting in Egypt and the Middle East and spreading across the Roman Empire. Most of those were fixed canopies of mats, skins, or fabric bolts hung over poles. In the mid-1800s, shop owners began using movable awnings, which simply bunched up the fabric when it was taken down. In the latter part of the century, they began rolling awnings on a tube, cleanly retracting them and keeping the fabric safe. With minor variation, this is the same basic design used today on lateral arm retractable awnings.