Home / Awning / class corrugated metal awning that you must have / How To Make A Wood Awning Build A Corrugated Awning How To Build A Wood Awning Frame How To Build An Awning Over A Door How To Build A Door Overhang Video
Sonya Awning April 23rd, 2018 - 12:18:56
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Energy saving: The result of installing awnings should be reflected in the power bill. A good awning can save 100 hours of energy consumption per month. However, you need to plan and install the awnings properly so that the system provides you with adequate heat protection. Home decoration: The awning should look nice on the walls; thats perhaps the most important quality of an awning. Consult a designer or architect and make sure to know what color combination and style would look aesthetically correct on the walls of your home. Durable: This is a quality all consumers look in whatever they use! To make utmost use of the awning, go for retractable ones. They can be pulled back when the weather is harsh and thus you can ensure a longer life of your awning.
Arms - the part of the frame which folds closed at the elbow when the awning is retracted (rolls in) and opens when the awning is extended (rolls out). Shoulder - the joints on the retractable awning arms where arms attach to the mounting bar. Front bar - the extrusion at the very front of the awning frame. Hood - a cover which fits over the retractable awning frame and fabric; when the awning is fully retracted, the hood protects the exposed fabric, frame, and motor from the elements. Valance - a strip of fabric, usually a few inches high, which hangs from the front bar of the retractable awning. Rib - the cross bars of the frame which support the awning fabric. Not every awning style has ribs, since ribs are often used to create a shape to the awning frame; for example, lateral arm retractable awnings dont have any ribs. Canopy - an elongated, dome, or waterfall style retractable awning.
Following paragraphs discuss the desired qualities of both types of awnings so that you find it easy to buy awnings, whether residential or commercial. Residential Awnings: There was a time when almost all residential building had awnings. When artificial air conditioning system was not invented, awnings were popular for keeping indoor environment cool. It was the most natural way to make rooms comfortable during summer. With increased energy cost, people have again started to shift towards awnings. Retractable awnings are quite popular nowadays. The qualities people look in a residential awning are as follows: Adequate element protection: Protection from sun, rain and snow is the prime reason for installing awning at home. While purchasing, make sure the materials used in your awning can protect you from heat and rain.