Sonya Awning April 20th, 2018 - 12:25:58
o Canvas - a natural fiber (cotton) woven fabric; canvas awnings are prone to fade, mildew, and rot.o Solution-dyed acrylic - a man-made fiber which is woven into a lightweight, breathable fabric; because it is a chemical polymer, the fabric cannot rot. Solution-dyed means that the pigments are included in the fiber solution, which makes the fabric highly fade resistant. For the frame, the important materials are the body and joints: o Electrostatically powder-coated aluminum - a metal frame which is lightweight, durable, and rust-resistant; powder-coating is a method of applying pigment to aluminum frames which is extremely difficult to flake off or damage, unlike enamel or paint.
Arms - the part of the frame which folds closed at the elbow when the awning is retracted (rolls in) and opens when the awning is extended (rolls out). Shoulder - the joints on the retractable awning arms where arms attach to the mounting bar. Front bar - the extrusion at the very front of the awning frame. Hood - a cover which fits over the retractable awning frame and fabric; when the awning is fully retracted, the hood protects the exposed fabric, frame, and motor from the elements. Valance - a strip of fabric, usually a few inches high, which hangs from the front bar of the retractable awning. Rib - the cross bars of the frame which support the awning fabric. Not every awning style has ribs, since ribs are often used to create a shape to the awning frame; for example, lateral arm retractable awnings dont have any ribs. Canopy - an elongated, dome, or waterfall style retractable awning.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
Other retractable awning features impact how well the awning wears, and, therefore, how easy it is to maintain: Electro-statically powder-coated aluminum frames to resist corrosion and chipping Sealed and self-lubricating retractable awning motors Weather-sealed wind, motion, rain, and sun sensors and other accessories Stainless-steel mounting hardware to prevent staining or bleeding from rust Kevlar® brand straps in the arms, not steel cables which will rust TÜV product approved and Eurolab certified frames These components make the average lifetime of a retractable awning 12-15 years for fabric and 25 years for the frame - almost five times longer than most fixed awnings or canopies, and without the need to professional cleaning or seasonal storage problems. With retractable awnings, the keyword for maintenance is effortless.