Home / Awning / brilliant camper awnings replacement fabric photos / Dometic Rv Awning Replacement Fabric Replacement Awning Fabric Kit How To Install Rv Awning Video Dometic Awning Fabric Replacement Instructions How To Replace Rv Awning Roller Tube
Sonya Awning April 29th, 2018 - 12:16:20
Here are a few helpful tips for installations: Always attach retractable awning mounting brackets to a load-bearing part of the building, like a stud, joist, rafter, brick, or beam, depending on the mounting option. Use a chalk line and level. Its just easier than trying to eyeball whether the awning or screen is even. Because of the weight of the awning and to keep everything properly positioned, have two people working on the retractable awning installation. Read the instructions in the kit or on the companys website. When in doubt, call the manufacturers customer service line.In a decent afternoon of work, you can have a lovely retractable awning or drop screen installed over a patio, garden, eating area, walkway - wherever you want to make a pleasing, comfortably shaded haven.
Installation in a Few Easy Steps The general installation process for both traditional retractable awnings and drop screens is pretty simple: attach the correct number of mounting brackets using the appropriate fixing and insert the torsion (square) bar. The simplicity of installing awnings is what makes them ideal for do-it-yourself weekend projects. The exact installation steps, naturally, vary depending on the awning being installed (so always read the manufacturers specific instructions!), but these are the general processes. For a drop screen:1. Assemble the screen itself, putting together the roller (called the headerbox), similar to an old-fashioned shade.2. Install the mounting brackets at the top and around the door frame or the beam of the gazebo or porch.3. Snap in the headerbox, making sure that the bottom rail of the screen is toward the inside of the room.4. If there are vertical side guides, measure and cut them according to the height of the opening, and then screw them in place and snap them in position with the headerbox. If there are guide wires, screw the bottom brackets into place, and attach the wires to the cassette. Be sure everything is level and plumb.
Why is the awning being used? Figure out clearly why that area needs protection and what element you want to control. The requirements for the awning are different for rain protection and sun protection. For example, to use the awning in wet areas, have at least a 3 inch slope, or pitch, to the awning per foot of extension. If an awning extends 12 feet, the pitch should be 36 inches, meaning that the awning must be mounted 3 feet higher than the height at the end of the awning fully extended. Awnings in sunny locations with little can be nearly flat. For other situations, awnings may not be ideal; high, sustained winds can seriously damage awnings, as can the weight from snow, ice, and hail. Accessories like wind or motion sensors can also be used to protect the retractable awning in less than ideal conditions.
Consider whether the additional cost for a high end retractable awning is worth the additional quality. The functional distinctions between high and low quality retractable awnings are significant: - Commercial (high quality) awnings have non-prorated frame warranties of 25 years and fabric lifetimes as long as 12-15 years, while residential (budget) lines have frame warranties and fabric lifetimes of five years or less. - Commercial grade retractable awnings come in custom sizes, down to an inch measurement, while many residential lines have only a few standard sizes. - Commercial retractable awnings have hundreds of fabrics available, while budget lines usually have much fewer color and pattern options. Additionally, high quality awnings use a woven fabric called solution-dyed acrylic which resists fading, mildew, and rot, while budget awnings use cheap materials such as canvas (which fades quickly) or vinyl (which absorbs the heat and does not breathe).