Sonya Awning April 29th, 2018 - 11:20:11
retractable and fixed awnings: Visibility. Many fixed awnings use stanchions or posts which can block the view; retractable awnings are suspended, either by springloaded arms or with guidewires, depending on the syste. Since they dont require external support, they allow uninterrupted views. Easy installation. Retractable awnings are very simply mounted onto the structure at points like a wall or beam without heavy labor or construction. Variety of use. Retractable awnings can go in small or special areas, such as over windows, where fixed canopies would not be appropriate. Changeability. Retractable awnings can move according to different weather conditions, such as changing the slope of the awning during rain, closing during storms, or using a series of awnings across a long outdoor area that follows the sunlight.
Differences in Style The different reasons for retractable awning use in Europe and the US have produced different emphases on style. Because awnings had a stylistic influence in European history which transitioned to efficiency uses, European awning fabrics and designs tend to be more dramatic and flamboyant. For example, European fabric lines average about 400 fabric designs, while American lines average 200. Color choices in Europe tend to be lighter and brighter. American homeowners, approaching retractable awnings as a functional addition to a house, without the stylistic background, tend to be conservative, choosing fabrics in blacks and grays in sedate stripes and staying with more traditional frame styles.
One important note for drop screens: not every manufacturer has a do-it-yourself style, so make sure you dont need a contractor before ordering the screen. A retractable awning installation is slightly more complicated than a screen installation, so follow the manufacturers instructions:1. Locate the bricks, rafters, studs, or joists to which to mount the awning.2. Install a pressure-treated board at the install location if mounting onto siding. It is extremely important that the awning be mounted on a flat, level surface, which isnt always possible with siding, shingles, and brick. 3. Install the mounting brackets, with the end brackets about three inches inside the edge of the awning and the other brackets evenly spaced between them. The number of mounting brackets depends on the width and projection of the specific retractable awning. 4. Install and attach the optional hood about 1 inch above awning location. 5. Lift the retractable awning, and insert it in the mounting brackets.6. Tighten the retaining bolts.
PVC - a hard polymer also used to make plumbing pipes; this tends to be brittle. Kevlar® - the polymer used to make bulletproof vests; Kevlar® straps in the arms instead of cables are extremely strong and durable and cant rust. Cables - braided metal strands which are used in the arms; these are usually steel, which rusts, leading the cables to discolor the fabric and eventually break. Cables cannot be replaced because they are internal to the arm and inaccessible. Terms: Installation Understanding a few terms about the positioning and installation of the awning can help determine the appropriate size and installation location for your awning: o Mount - what way or location the awning is affixed to the home or building, such as a wall mount, eave mount, soffit, or roof mount. Pitch - the angle that the awning comes down from the mount point to the front bar. Some lateral arm retractable awnings have an adjustable pitch. Projection - how far out from the wall the awning can extend. Load - the stress put on the awning, from wind, snow, even the weight of the awning itself (dead load). Good quality retractable awnings can sustain wind speeds up to approximately 35mph Pooling - water buildup on the canopy which can cause the fabric to sag and stretch.